FT-103 Recife Fountain
Two people are recommended for the installation of this fountain!
Revised September 13, 2018
Assemble your fountain on a level surface capable of holding a minimum of 547 pounds with an approximate 8
square foot footprint.
FT-103 D (264 lbs)
43”L x 26”W x 8”H
FT-103B (16 lbs)
10”L x 7”W x 6”H
FT-103A (96 lbs)
34.75”L x 18.5”W x 8”H
FT-103C (1 lbs)
3.5”L x 1”W x 4”H
1.
Position the basin (FT-103D) where the fountain is to be
installed, ensuring that it is level.
2.
Assemble the fountain plumbing
a.
NOTE: Be sure to use the appropriate size adapter
provided with the pump
b.
Attach the 1/2" black end of the tubing assembly to the pump
outlet.
c.
Place the stopper around the pump cord approximately 8”
from the pump.
3.
Feed the pump cord all the way through the hole in the
basin and run the cord through the channel in the bottom to
ensure the fountain will be level.
4.
FIRMLY
press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver or hammer
works best to press the stopper in place.
5.
Place the pump cover (FT-103B) over the pump. Ensure it
is placed properly and leveled.
6.
Position the water feature (FT-103A) over the pump cover
(FT-103B).
7.
Insert the 1/2" CPVC end of the tubing assembly into the
coupling protruding from the bottom of the water feature
(FT-103A).
8.
Ensure the water feature is centered and leveled on the
pump cover.
9.
Insert the 6 ¾” length of copper pipe into the CPVC
coupling inside the water feature (FT-103A).
10.
Place the pump cover door (FT-103C) in the pump access
opening of the pump cover.
11.
Fill the fountain with water.
