FT-326 Dolce Nido Fountain
Assemble your fountain on a level surface capable of holding a minimum of 250
pounds with an approximate 1 square foot footprint.
FT-325C (209 lbs)
24.75”W x 33.25”H
FT-325B (4 lbs)
5”W x 2.5”H
FT-326B (14 lbs)
13”W x 4”H
FT-326A (6 lbs)
9.25”W x 3.75”H
1.
Position the basin (FT-325C) where the fountain is to
be installed, ensuring that it is level.
2.
Assemble the fountain plumbing
a.
NOTE: All pumps come with 2 adapters.
i.
This fountain uses the larger adapter
provided.
ii.
Use a hose clamp to attach the non-kink
tubing to the pump outlet.
b.
Place the stopper around the pump cord
approximately 6 inches from the pump.
3.
Feed the pump cord all the way through the hole in the
basin and run the cord through the channel in the
bottom to ensure the fountain will be level.
4.
FIRMLY
press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver or
hammer works best to press the stopper in place.
5.
Place the pump cover (FT-325B) over the pump.
Ensure it is centered and leveled.
6.
Insert the CPVC end of the tubing assembly into the
coupling protruding from the bottom of the small bowl
(FT-326B).
7.
Center the small bowl (FT-326B) on top of the pump
cover (FT-325B).
8.
Center the water feature disc (FT-326A) in the center
of the small bowl (FT-326B).
9.
Fill the fountain with water.
Revised July 17, 2018
