FT-171 Corsini Wall Fountain
Assembly Instructions
Two people are recommended for the installation of this fountain!
Assemble your fountain on a level surface capable of holding a minimum of 375 lbs with an
approximate 2 sq. ft. footprint (actual dimensions 26.5" x 16").
Step 1 - Position the basin (FT-171A) where the fountain is to be installed, ensuring that it is level.
Step 2 - Assemble the pump and tubing:
2a - Using a hose clamp, attach the 1/2" non-kink tubing to the pump outlet.
2b - Place the stopper around the pump cord approximately 6 inches from the pump.
Step 3 - Feed the pump cord through the hole in the basin (FT-171A).
Step 4 - FIRMLY press the stopper into the hole evenly.
4a - Note: Using the handle of a screwdriver or hammer works best to press the stopper
in place.
Step 5 - Fit the clear tubing connected to the non-kink tubing over the PVC protruding at the
bottom of the basin.
Step 6 - Insert the CPVC end of the tubing assembly into the coupling at the bottom of the water
feature (FT-194A).
FT-171A (281 lbs)
26.5"L x 16"W x 40.5"H
Step 6 - Place the pump cover (FT-165B) over the pump.
Step 7 - Fill the fountain with water.
FT-165B (6 lbs)
9"L x 5.5"W x 5"H
