FT-256 Charleston Fountain
Three people are recommended for the installation of this fountain!
Revised May 8, 2017
Assemble your fountain on a level surface capable of holding a minimum of 1100 pounds with an approximate 2.75 square foot
footprint.
FT-239J (242 lbs)
20”L x 20”W x 12”H
FT-256F (217 lbs)
15.75”W x 28.5”H
FT-256E (308 lbs)
46.5”W x 10”H
FT-256C (72 lbs)
10.75”W x 24.75”H
1.
Place the base (FT-239J) into position where the fountain will
be installed, ensuring that it is level.
a.
Note: Check that all components are leveled as the
fountain is assembled.
2.
Position the large pedestal (FT-256F) over the base (FT-236J).
3.
Center the large bowl (FT-256E) over the large pedestal (FT-
256F).
4.
Assemble the fountain plumbing
a.
Attach the 3/4” clear tubing to the pump outlet.
b.
Place a hose clamp over the other end of the 1/2" non-
kink tubing
c.
Place the stopper around the pump cord approximately
8” from the pump.
5.
Feed the pump cord all the way through the hole in the large
bowl (FT-256E), through the large pedestal (FT-256F), and
out of the opening in the bottom of the base (FT-239J).
6.
FIRMLY
press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver or hammer
works best to press the stopper in place.
7.
Place the pump cover (FT-256C) over the pump.
8.
Feed the tubing connected to the pump through the top of the
pump cover (FT-256C).