FT-120 Andalusia Fountain
Assembly Instructions
Step 9 - Assemble the pump kit:
9a - Using a hose clamp, attach the 1/2" black tubing to the pump outlet.
Step 10 - Place the pump and LED light in the fountain and feed the cords through the hole
between the basin (FT-120C) and water feature (FT-120A).
10a - Attach the LED light to the transformer outside of the fountain.
Step 11 - Fit the 5/8" clear end of tubing assembly over the CPVC installed into the water feature
(FT-120A) in step 5.
Step 12 - Place the pump cover (FT-120B) over the pump along the back of the basin.
Step 13 - Place the #7 drain stopper into the hole at the bottom front of the basin.
Step 14 - Place LED light in the front of the basin aiming the light at the waterfall.
Step 15 - Let the fountain sit 24 hours before filling it with water.
FT-120B (37 lbs)
13"L x 7.5"W x 15.25"H
