ERGOPOWER WL CONTROLS - Rev. 03/ 08-2022
CAMPAGNOLO COMPONENTS - USER MANUAL
9
DRAFT
W
Q
R
Fig.7
Fig.8
Fig.9
Fig.10
Fig.11
For each pad, check that the W pad wear indicator (Fig.7) is present, that the pad is properly positioned with the metal support Q (Fig. 7) in contact with
the piston, and that the R friction area of the pad (Fig.7) is in contact with the disc. If this is not the case, consult a qualified mechanic or a Campagnolo
Pro Shop (as indicated in Chapter 2 - "INFORMATION AND TECHNICAL SUPPORT").
Failure to follow the above instructions could result in loss of control of the
bicycle and cause an accident, personal injury or death.
WARNING!
!
Use in wet, muddy, sandy or dusty conditions may drastically reduce the lifetime
of the brake pads, causing earlier wear than if they were used on clean asphalt
roads. As such, it is important to check very frequently that the W brake wear
indicator (Fig. 7) is visible on the pads. If it is not visible, ask your mechanic to
replace the pads.
WARNING
Only use original Campagnolo
®
pads - in addition to having different friction surfaces which can alter the effectiveness of braking, a
pad made from a different support material (for example, aluminium rather than steel) could result in increased transmission of heat
to the calliper, causing the brake system to overheat which in turn could lead to accidents, injury or death.
WARNING!
!
Using a different brand of brake pads instead of original Campagnolo
®
brake pads, automatically voids the product warranty.
WARNING
5.2 - OPERATION AND ADJUSTMENT OF THE BRAKES
Right-hand Ergopower control
By pressing the lower lever, the rear derailleur shifts up (Fig.8).
By pressing the upper lever, the rear derailleur shifts down
(Fig.9).
Left-hand Ergopower Control
By pressing the lower lever, the front derailleur shifts up
(Fig.10).
By pressing on the upper lever, the front derailleur shifts down
(Fig.11).
The functions of the levers can be customised using the
MyCampy app.
