COMPONENTS
MAINTENANCE - Rev. 01/ 06-2019
7
6 - BATTERY CHARGER
• Since it does not contain any user-serviceable parts, do not open the EPS battery charger for any reason.
• Th
e
EPS
battery
charger may
only
be
used indoors
and
must
not
be
exposed
to rain or
humidity.
• The
EPS
battery
charger should only
be
used
to
charge
the
battery
pack
for the
Campagnolo
EPS
Power Unit.
WARNING!
Only use the power cable supplied with the battery charger for use with mains power or one for use with a 12 VDC vehicle
power supply. The use of cables other than those specified by Campagnolo s.r.l. may cause electric shock, explosion, fire,
injury or death.
• Always disconnect the EPS battery charger from the mains socket when not in use.
• If the unit is malfunctioning, do not attempt to open or repair it in any way and contact a Campagnolo Service Centre or Pro-
shop.
• Keep the EPS battery charger out of the reach of children and animals.
IMPORTANT!
Never use denatured alcohol to clean your EPS battery charger.
Please contact a Campagnolo Service Centre or Campagnolo Pro-Shop for information on how to correctly dispose of
your EPS battery charger.
• Although the system has an IP67 water resistance rating, washing the bicycle with pressurised water or with harsh detergents
is not recommended.
• Dirt seriously damages the bicycle and its components. Rinse, clean and dry your bicycle carefully after use.
IMPORTANT: for cleaning the bicycle only use environmentally-friendly and neutral products without caustic substances
and safe to use for you and for the environment.
• Dry the drivetrain with a soft cloth: never use abrasive sponges or metal scouring pads.
Never wash your bicycle with pressurised water. Pressurised water - even from a normal garden hose - may infiltrate through the
seals and into your Campagnolo
®
, components, causing irreparable damage to them. Wash your bicycle and the Campagnolo
®
components by delicately cleaning with soap and water and drying thoroughly.
WARNING!
Saline conditions (such as roads in winter and in coastal areas) may cause galvanic corrosion in the majority of the
exposed bicycle components. To prevent damage, malfunction and the consequent risk of accident, rinse, clean, dry and
re-lubricate all components subject to corrosion.
7 - HOW TO CLEAN THE EPS COMPONENTS
