CAMPAGNOLO Ekar 13S Rear Derailleur страница 7 Скачать руководство пользователя

Страница: 7 / 12

REAR DERAILLEUR - Rev. 00/ 09-2020

CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL

Fig.11

• Use only “The Maximum Smoothness”

cables and housings, and ferrules like the

ones shown in

Fig.11.

• Pay particular attention not to drag the

cables of the rear derailleur and of the

front derailleur on the metallic or sharp

edges to prevent damage to the Teflon™

surface.

Fig.12

Cables and casings do not

require lubrication since they

are supplied already lubricated.

Fig.13

• If the cable is damaged, please replace

it before riding your bicycle. If the casing

is too short, rear derailleur operation will

be affected (Fig. 13).

• Check the length and, if necessary,

shorten the casing.

Take care to cut it straight across without

altering the configuration of the casing

and without damaging the cable in any

way (Fig.12).

Fig.14

• Insert the cable into the cable tension

adjuster (E - Fig.14), and pass it through

the appropriate cam (F - Fig.14) and the

recess (G - Fig.15) in the rear derailleur.
Fix the cable in place with the locking

screw, tightening to a torque of 5 Nm

(44 in.lbs).

Fig.15

5 Nm

(44 in.lbs)

Содержание Ekar 13S Rear Derailleur













Результаты поиска

Содержание Ekar 13S Rear Derailleur

Отзывы:

Похожие инструкции для Ekar 13S Rear Derailleur

Бренды по названию

Популярные бренды

CAMPAGNOLO Ekar 13S Rear Derailleur, Техническое руководство

Результаты поиска

Содержание Ekar 13S Rear Derailleur

Отзывы:

Похожие инструкции для Ekar 13S Rear Derailleur

Бренды по названию

Популярные бренды