CAMPAGNOLA STARBERRY MD2, Руководство по эксплуатации и обслуживанию

Страница: 21 / 236

Use and Maintenance Manual – Original
Instructions Rev.: 00, Date 19/03/2021
Pag. 21
3.1 Product identification
The identification details are printed on the tool.
3.2 Product description
The electric vibrating hook, named Starberry MD2, and power-supplied by a plug-in battery (13), is a product intended for
harvesting blueberries and other kinds of similar fruit.
The vibrating hook is composed of a body with an ergonomic handle, a gearmotor, an electronic speed controller, a trigger
(5) and a pole (8) with hooks (9) and (10). The body is fitted with an ON/OFF button (22), driving the tool switching-on-and-
off operations, the +/- buttons (3) and (4) to select the speed, which allow to vary the pole (8) vibration frequency, and a red
LED light (2), to check the on-and-off status of the tool.
At each re-start the system keeps the previously set frequency memorized. Moreover, the tool is fitted with a regenerative
braking system, which allows the recovery of energy, limiting its consumption.
IMPORTANT!
Please mind that the tool has been designed and manufactured just for the aims described above.
WARNING!
The tool has been designed and manufactured exclusively for the purposes mentioned above.
3.3 Parts supplied
- Electric vibrating hook
- Carbon pole
- 2 adjustable hooks
- 1 fixed hook
- 3 lithium batteries
- Battery charger
- Quick guide for the tool first use with indications to read/download this use and maintenance manua
- Maintenance tool kit
- Carrying case.
3.4 Intended use
The tool has been designed for cutting and pruning according to the above-described manners and limits .
WARNING!
• Any other use has to be considered improper and potentially dangerous for the operators’ safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may get damaged and cause serious injuries to
personnel and bystanders and damages to things.
3.5 Tool parts
Pos. Description Function Pict.
1
ON/OFF button Switches the tool on and off
A
2
ON/OFF LED indicator Shows whether the tool is on or off A
3
+ button Allows to increase the shaking speed A
4
- button Allows to decrease the shaking speed A
5
Trigger Operates the tool A
6
Trigger guard Prevents from accidental tool activations A
7
Transmission shaft Transmits motion from the tool to the hooks assembled on the pole A
8
Fixed pole Connects the hooks to the tool A
9
Adjustable hooks Allow to shake the branch A
10 Fixed hook
Allows to shake the branch A-C
11 Screws for the hooks
Allow to fix the hooks on the pole A-B
12 Locking nuts
Reduce considerably the unscrewing of the hooks B
13 Battery
Makes the tool work B
14 Release plates
Allow to plug in/disconnect the battery B
15 Battery contacts
Connect the battery to the tool B