2. Install the top panel using the supplied screws as shown. Do not tighten hardware at
this point.
3. Install the bottom panel using the supplied screws as shown. Do not tighten
hardware at this point.
4. Install the bottom tray using M6 x 12MM Button Head Screws and 6MM lock washers
as shown. Do not tighten hardware at this point.
5. Tighten screw indicated before assembling wheels.
6. Install the axle through the cart and assemble wheels. Install axle nuts and tighten.
7. Install wheel caps onto wheels
8. Install leg levelers
9. Stand stove upright.
6mm LOCK WASHER
M6 X 12mm LONG
BUTTON HEAD SCREW
SCREW
TOP PANEL
BOTTOM PANEL
BOTTOM TRAY
6mm LOCK WASHER
M6 X 12mm
BUTTON HEAD SCREW
SHELF BRACKET
6mm LOCK WASHER
M6 X 12mm
BUTTON HEAD SCREW
AXLE NUT
WHEEL CAP
AXLE
WHEEL
AXLE NUT
WHEEL CAP
WHEEL
Tighten this screw before assembling wheels.
LEG LEVELER
