■
CAMERA CM-31/32AH
1. Determine a position and a direction of installation so that the rear view can be
effectively seen on the monitor screen.
2. Fix the camera bracket to the vehicle using the provided adhesive tape and
tapping screws with spring washers.
3. Fix the camera between the camera bracket and sun visor using machine
screws, and adjust the angle of camera and fasten the screws firmly.
4. Run the cable from the monitor to the camera.
CAMERA CONNECTOR
①
②
③
④
⑤
⑥
⑦
POWER IN(DC +12V)
HEATING B+ (DC +12V)
NC
VIDEO OUT
AUDIO OUT
NOR/MIR
GND
< CM-31/32AH >
=
17
16
(No. CR2025)
9. Changing Remote Control Battery
Put the battery case back into the remote
control in the direction of the arrow.
Pull battery case in the direction of the arrow.
Place a battery with the + sign upward on
the battery case.
①
②
③
Tapping screw(RH)4x10
Camera Bracket
Adhesive tape
Safeguard tape
Spring washer(M4)
Sun visor
IR-LED
Mic
Machine screw(ASS'Y)
Spring
Washer(M3)
(PH) M3 X 8
Machine screw
(PHW) M3 X 6
CDS sensor
