background image

3

SAFETY

SAFETY

This guide uses the following symbols to emphasize particular

information:

CAUTION: Indicates a potentially hazardous situation which, if

not avoided, may result in damage to vehicle components.

NOTE: Indicates supplementary information.

USER NOTICE AND DISCLAIMER

The 

Tatou® UTV

 System was initially designed to be used in

winter conditions and was then adapted to be used in fall and

spring conditions. 

This document holds important information regarding driving an

UTV equipped with the 

Tatou® UTV

 System by Camoplast. It is

mandatory that every user takes the time to carefully read,

understand and then consult this reference manual and user

guide as well as the UTV owner's manual as needed. When

purchasing either a new or used track system, the user must

obtain all documentation related to the System, including manu-

als and guides related to the UTV on which the System is

installed. If need be, contact the Camoplast products dealer

nearest to you to obtain any additional information. You may

also consult the Camoplast Web site at: www.camoplast.com

and call our technical support line at: 1 866-533-0008 or 819-

533-0008 or send an email to: atvtracksystems@camo-

plast.com.

Camoplast believes that there are certain risks related to the

installation and use of the System. Our experience shows that

the System is safe. However, the user must be aware of the

risks related with driving an UTV with the particularities of this

type of System. The UTV driver must, at all times, respect all

applicable laws and regulations, the indications of the System

manufacturer and the indications from the vehicle manufacturer

fixed by law, namely when age restrictions exist and UTV base

equipment is required (headlights, flashers and brake lights,

rearview mirror, etc.). The user must always wear adequate

safety equipment, such as a helmet, safety glasses (or visor),

WARNING

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury. 

Содержание Tatou
























Отзывы: