Camon C50i, Руководство по эксплуатации

Страница: 13 / 24

Tracmaster Ltd CAMON C50i Chipper
_______________________________________________________________________________________________
For parts diagrams visit
www.tracmaster.co.uk 11
WARNING - The exhaust may be hot.
TURN OFF THE FUEL TAP BEFORE TRANSPORTING THE MACHINE.
FAILURE TO OBSERVE THESE POINTS MAY RESULT IN PERSONAL INJURY.
If you are using the collection bag over the discharge chute then ensure it is not obstructing
the exhaust as damage to the bag will occur from a hot exhaust.
Never stand on the discharge side of the machine or directly in front of the chipper chute.
KEEP TO ONE SIDE.
5.5 Procedure for Unexpected Shut Down
Turn the engine operating switch located on the engine to the OFF position.
Ensure that the rotor disc and blade have stopped rotating prior to moving the machine.
WARNING: ALWAYS TILT THE C50i CHIPPER AWAY FROM THE AIR FILTER TO AVOID
OIL IN THE ENGINE FLOODING INTO AREAS WHERE IT WILL CAUSE DAMAGE.
5.6 Residual Risks of the C50i Chipper
The rotor disc will continue to rotate for a couple of seconds once he engine has been
switched off. Ensure that the blade has stopped rotating prior to moving or tilting the
machine.
The C50i Chipper is designed to be pushed by the operator during transportation. It has no
brake system and the operator must position the machine only on flat areas during
operation.
DO NOT OPERATE THE C50i ON SLOPED AREAS OR AT AN ANGLE.