Fastening the first board and last board
: Secure the first board along the house or at the outside
of the deck. By face fastening with the appropriate screw for the deck material at each joist.
FOR USE WITH COMMON 90° DECKING PATTERN
1. On the outside edge
of your installed starter
board, simply place
EDGECLIP
™
onto the joist
allowing the "legs" of the
clip to snugly grasp the
joist and hold the clip
in place.
2. Place EDGECLIP
™
at
every joist along the
length of the board.
3. You are now ready to
slide your next board up
against the EDGECLIPS
between the two boards.
4. Holding the new board
tightly in place, screw
down all of the clips
between the boards.
Use the yellow
Never-Miss™ Guide
(
shown here) included, to
perfectly engage the
driver bit with the screw
head for fastest
installation.
5. Follow the same
process for each deck
board.
At the same time, slide the
metal gusset into to the
groove of the deck board.
NO NEED TO PRE-SET
SCREW INTO JOIST.
The clip will now stand
firmly in place.
