ASSEMBLY INSTRUCTIONS
Camo Hood Wrap / Bed Tonneau Cover
Page 2 of 2
PN 15506
Congratulations on the purchase of your Camo Tonneau Cover! These instructions will guide you through the assembly process. Carefully read these instructions
and familiarize yourself with components before starting the assembly process.
Please call 1-800-643-7332, visit our website at americanlandmaster.com, or your local dealer, if you experience any problems with this kit or need further
assistance.
Camo Tonneau Cover
III. Tonneau Cover Installation
•
Insert the Support Bar in the center Stake Pocket as shown in Fig 1
•
Unfold the Camo Tonneau Cover
•
Orient the Cover such that the SHORT Velcro® straps are at the REAR of the bed
•
Stretch the Tonneau cover over the poly bed in the same manner as a fitted bed sheet. Ref Fig 2
•
Open the dump bed and route the Velcro® straps under the steel bed frame as shown in Fig 3
•
Route the rear Velcro® straps as shown in Fig 4
Fig 1 – Support Bar Installation
Fig 2 – Tonneau Cover
Fig 3 – Front of Cover Strap Routing
Fig 4 – Rear of Cover Strap Routing
IV. Hood Wrap Care
•
Hood Wrap can be attached and removed as often as desired
•
Machine wash COLD and TUMBLE DRY on LOW heat. DO NOT use detergents with Optical Brighteners or Bleach