CammSys CH-300, Руководство пользователя

Страница: 31 / 37

30
CAMMSYS CH-300
18. F/W Upgrade
19. SD card format
1. Remove the SD card from the device after the dashcam is completely powering off.
2. After connecting the SD card to the PC, copy the firmware file to the top of the SD card.
3. Insert the SD card into the dashcam and power it on to boot the device.
4. When the firmware update has completed, the firmware file stored on the SD card have automatically
deleted and the dashcam has rebooted.
1. Please turn the power on while holding down the button.
2. Press and hold the button to enter the formatting step after voice guidance (“Do you want to format
your SD card?“).
3. If you press the button briefly in the formatting step, the SD card will be formatted and it will switch to
normal recording after formatting has completed.
※ If the button is not pressed during the formatting step, the voice guidance will be repeated and the
formatting will automatically be canceled when the power is turned off.
Running the Firmware
How to format the SD card on the device