Camlab CW/6230, Инструкция по эксплуатации

Страница: 11 / 28

11
8. Configuration of the unit
To configure the unit, press the [Menu] key.
The first menu item appears.
If you press the [Menu] key again, the display jumps to
the next menu item.
You can set the various parameters using the
[
▲
] [
▼
]
.
keys.
Press the [Store] key to store and conclude configura-
tion.
The unit then switches back to measuring mode.
You can terminate the configuration process by pres-
sing the [Meas] or [Hold] key.
Settings made up to this point are not stored.
The unit retains the previous settings.
8.1 Resolution: resolution of display
for oxygen measurement
Hi: high resolution, restricted measuring ranges
Lo: low resolution, maximum measuring ranges
Auto: automatic, maximum measuring ranges
Hold Meas
+
Hold
Camlab CW/6230 2/5/06 3:33 pm Page 11