14
Ice Master
®
H-Series
English
Operating Your Sprayer
GETTING STARTED
1)
Take tank lid off and fill tank at least
a quarter full with water, enough to
run through the system to check all
components are functioning correctly
and are leak free.
3)
Power on sprayer pump using the
switch on wire harness. If there is liquid
in the tank and the valve in step 2 is
in the open position, the pump should
prime automatically.
4)
Adjust regulating valve to aquire
desired pressure. Start by threading
the regulating valve all the way down
(clockwise), then back off 3 revolutions
(counterclockwise).
2)
Ensure the inline valve between tank
and pump is in open position (parallel to
hose) to allow the liquid to flow from the
tank to the pump.
