PM 1000288 000 00
Device handbook SIRAX BT5100
20/32
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
O/P 1
A
O/P 1
A
*
O/P 1
A
*
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
O/P 1
A
O/P 1
A
*
O/P 1
A
*
Enter New / Change End value of the Output 1, second digit entered, prompting for third digit. (*Denotes that
digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the third digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the third digit, in this case to
“0”.
Enter New / Change End value of the Output 1, third digit entered, prompting for fourth digit. (* denotes that
digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the “New / Changed End value of the Output 1” and
set the fourth digit, in this case to “0”.
New/changed End value of the Output 1 confi rmed.
Pressing the “
Down” key will re-enter to the “New / Change End value of the Output 1 edit” mode.
Pressing the “
Up” key will confi rm New End value of the Output 1 and advance to the Start value of
Output 1 (section 7.1.6.1.2).
Pressing the “
Down” key will enter the “ New/Change Start value of the Output 1 edit” mode.
Pressing “
Up” key will confi rm the present value as Start value of the Output 1 and advance to the selec-
tion of Elbow value of Output (section 7.1.6.1.3) or Output 2 parameter selection (section 7.1.6.2)
New / Change Start value of the Output 1
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will not aff ect the fi rst digit It always remains 0.
Pressing the “
Up” key will advance the operation to the next digit and set the fi rst digit, in this case to
“0”.
Enter New / Change Start value of the Output 1, fi rst digit entered, prompting for second digit. (*Denotes that
digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the second digit from 0 through to 4, the value will wrap
from 4 round to 0 depending on the set End value of Output.
Pressing the “
Up” key will advance the operation to the next digit and set the second digit, in this case to
“0”.
7.1.6.1.2 Start value of output 1
This screen allows the user to set the Start value of Output 1 (considerd as DC Current). Start value of Output can be set up to 20% of set End
value of Output.
