Camille Bauer CAM mobile, Руководство пользователя

Страница: 42 / 66

42/66
B4.2 Measurement display of system quantities
Present : Contains the instantaneous values of the
system
Minimum, maximum : Shows all acquired minimum and
maximum values with timestamp
Reset minimum, maximum : Allows to selectively reset
the acquired extreme values
Present
This predefined assembling of measurements consists of
multiple pages. The representation can be switched from
big (3 values) to small (6 values), or vice versa, using the
key

. To select the next or the previous page use the
keys

and

.
Minimum, maximum
For selected measurements acquired maximum and, if
applicable, minimum values can be displayed with
timestamp (time of occurrence).
The selection of the page to display may be done using

and

.
Reset min., max.
For all acquired extreme values or selectable kinds of
measurand, minimum and maximum values may be reset
by pressing

for a longer time (>1s).
Note: For measurands like the slave pointer IB it may
take several minutes until a new value is stored.
The displayable measurements depend on the
configured system (type of connection). The displayed
measurement combinations therefore may be different according the application. Details for the timestamp (time
of occurrence) used here may be found in the chapter
settings of the clock.