Camfil CITY M Скачать руководство пользователя страница 6

 

 

TECHNICAL MANUAL 

 City M

 

 

www.camfil.com 

City M/Manual, 

 

 

 Ver. 001 

 

September 2014

 

    

6

 

 

1.

 

In its standard version, this product must only be used for handling dry non-explosive materials. If the air purifier is 
used for purposes other than those set out in the technical Manual, or is handled otherwise than set out therein, 
Camfil AB can accept no liability whatsoever for the consequences of said use/handling. 

2.

 

NOTE: Fixed installation may only be carried out by a professional with the appropriate qualifications who takes 
responsibility for the installation. 

3.

 

The machine must not be used in ATEX classified areas or where explosive gases may be present at any time. 

4.

 

Electrical connection may only be carried out by an appropriately qualified electrician. 

5.

 

All accessories, filters, spare parts, etc., used must be approved by Camfil. Guarantee undertakings cease to apply 
if the foregoing is not respected. Please contact Camfil for the correct accessories. 

6.

 

Do not cover inlets or outlets. 

7.

 

Inserting objects through inlets or outlets is forbidden. 

8.

 

The unit

 must not be used in environments where burning/smouldering objects can get into the machine. 

9.

 

The unit

 must be used indoors only. 

10.

 

The unit

 must be used in the -25˚C – 60˚C temperature range only. 

11.

 

The unit

 must not be drenched with water. The highest permitted humidity is 85% if a carbon filter is used. 

12.

 

Follow the filter handling and replacement instructions very carefully. Incorrect handling can damage the filter 
medium and the guaranteed filter class will not be achieved as a result. 

13.

 

Take great care when handling used filters. Incorrect handling can result in ill health or sickness. Follow the 

instructions for filter replacement. 

 

10. Design 

The unit

 is a self-standing one-section design housing the filters, fan section and all electrical connections. 

The machine is entirely constructed of aluminium and plastic parts and is therefore environmentally friendly and recyclable. 

10.1. Constituent standard components 

In its standard version, the air purifier is supplied with the following components: 

 

One 

CamCleaner City M

 unit. 

 

Filters for the chosen purpose. 

 

Quick guide. 

 

Technical Manual. 

 

Fan instructions (from the fan supplier). 

 

Electrical connector 

If anything is missing, or if you require further information about accessories, please contact Camfil. 

Содержание CITY M















Отзывы: