CamFi ZF, Руководство пользователя

Страница: 23 / 24

20
www.cam-fi.com
Controller.
Warning:
To avoid fire, loss of power, and personal injury, always follow the following safety guidelines
when using the battery, charging, and storing.
USE:
Make sure the battery is fully charged before each use.
Battery Charging:
The battery will stop charging automatically when it is full. Disconnect the batteries from the
charger when fully charged.
Battery Storage:
1. Discharge the battery to 40%-65% if it will NOT be used for more than 10 days. This can greatly
extend the battery life.
2. The battery enters hibernation mode when voltage gets too low. Charge the battery to bring it
out of hibernation.
Battery Maintenance.
1. Do not overcharge or over-discharge the battery, as this will damage the battery cell.
2. If left unused for a long time, it will affect the battery performance.
3. Never use the battery when the temperature is too high or too low. The ideal operating
temperature is 10° C - 55° C (50° F - 131° F). Do not store the battery in any environment with a
temperature of over 60° C (or 140° F).
4. Recharge and discharge the battery about every 3 months to maintain the battery life.
Disposal
1. Do not dispose of the battery in regular trash. Strictly follow your local regulations regarding the
proper disposal and recycling of batteries. Only dispose of the battery after a complete discharge.
2. If the battery cannot be fully discharged, contact a professional battery disposal/recycling
agent for further assistance.
Product Warranty
Warranty Period
1. Customers are entitled to replacement or free repair service in case of quality defect(s) found in
the product within 15 days upon receipt of the product.
2. Customers are entitled to free repair service from CamFi Limited for any product that is proven
defective in material or workmanship that results in product failure during normal consumer usage
and conditions within the valid warranty period. The warranty period is 12 months from the date of
delivery.
This warranty does not apply to the following:
1. Products subjected to unauthorized maintenance, misuse, collision, neglect, mishandling,
soaking, accidents, and unauthorized alterations.