Get the CamFi app
Connect to the Wi-Fi hotspot of the CamFi Pro
Start CamFi App
Firmware Upgrade
Need Further Assistance?
You will need to install the CamFi app on your
smartphone or your PC. The CamFi app is available
for iPhone®, Android ™ , Mac and Windows®. For a
full list of supported devices, visit:
http://www.cam-fi.com/download.html
The CamFi app will automatically check if there is
a new version of firmware available for the CamFi
Pro. When there is a new version available, the
app will start the upgrade wizard to upgrade the
firmware of the CamFi Pro. You can follow the
instructions provided by the wizard to upgrade
the firmware.
For answers to common questions and
troubleshooting steps, please visit:
http://www.cam-fi.com/support.html
You can also contact us with the following contact
information:
E-mail: [email protected]
Address: A1002, Tsinghua Science Park, 1st
College Road, Zhuhai, Guangdong, China
Website: http://www.cam-fi.com
1. On your smartphone or your computer browser,
visit:
http://www.cam-fi.com/download.html
2. Follow the instructions to install the CamFi app
on your smartphone or your computer.
After you turn on CamFi Pro and the system status
indicator light turns a constant green, you can
find and connect to the Wi-Fi hotspot of the CamFi
Pro with the name prefixed with “CamFi-Pro”on
your smart phone or your computer.
Launch the CamFi app on your smart phone or
your computer.
CamFi-Pro-xxxxxx
Quick Installation
1. Connect CamFi Pro to your camera
Connect the CamFi Pro device to your camera
using the mini USB cable, then turn on the CamFi
Pro and your camera.
FCC Warning:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
o Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not
explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This
device and its antenna must not be located or
operating in conjunction with any other antenna or
transmitter.