3.
To scroll through channels press either the Arrow Up or Arrow Down
button on the remote.
Changing Channels Using the Program Guide
1.
Use the ARROW buttons on the remote to scroll through the channels
available.
HINT:
Use the PAGE UP (Pg Up) OR PAGE DOWN (Pg Down) buttons
to scroll through by screen showing 5 channels at a time.
2.
To select a new channel to view, use the ARROW buttons to highlight that
channel.
3.
Press the OK/SELECT button.
4.
Press the OK/SELECT button to close the EPG.
Changing Channels Using Numbers in the Remote
1.
On the remote control, use the NUMBER buttons to type the number of
the channel to jump to. Example: 14
2.
After a brief pause, the channel will change to the typed number.
Channel Information
1.
Press the INFO button to view information about the channel currently
being
viewed.
HINT:
Use the RIGHT ARROW button to view program information for
future shows on that channel.
Changing Channel Guide Tabs
1.
Press the GUIDE button to cycle through the three-channel guide option
The Channel Guide Tabs are:
a.
All—Shows scheduled for all televisions channels offered by
Cameron
Communications
b.
Subscribed – Shows scheduled for only those channels subscribed
to
by
the
customer.
c.
Favorites – Shows schedules for only those channels selected as
favorites. There may be more than one Favorites Tab i.e.
Favorites1,
Favorites2,
etc.
(For more information see Favorites
section.
NOTE:
If channels seem to be missing from the EPG, the Channel Guide Tab if
probably set on a Favorites List. Check the Channel Guide Tab to make sure it is
set to All or Subscribed. If it is not set to All or Subscribed, press the GUIDE
button until the All or Subscribed tab is visible.
9
