Cameo Zenit B200, Руководство пользователя, Страница: 22 / 224

22
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
COLOUR TEMPERATURE (Tunable White)
The colour temperature mode enables you to configure the colour temperature from warm white to
cold white (CCT) and the brightness (Dim) of the light directly on the device. Select the colour temper-
ature mode as per the procedure previously described in SETTING STAND ALONE MODE and confirm
with ENTER. Using the UP and DOWN controls, now select the menu item that you wish to edit (observe
arrow) and confirm with ENTER. The display will show a three-digit number field and you can use the
UP and DOWN controls to configure the desired value. Confirm with ENTER. Press MODE three times to
return to the main display (Mode Tunable White).
----------- Stand Alone -----------
Auto
Colour Macro
Static
Tunable White
User Colour
Timer
Mode
Tunable White
000
100
–
Dim
000
255
–
CCT
---------- Programme x ----------
Dim <100>
CCT <255>
USER PRESETS (User colour)
The operating mode “User Presets” allows you to store five individual colour presets of overall bright-
ness, strobe and a colour mix of R, G, B and W directly in the device. Select the “User Colour” mode as
per the procedure previously described in SETTING STAND ALONE MODE and confirm with ENTER. Use
UP AND DOWN to select one of the stored presets Color1 to Color5 and confirm with ENTER and select
the submenu item you want to edit (see arrows). Confirm with ENTER.
The display will show a three-digit number field and you can use the UP and DOWN controls to set
the value as required between 000 and 255. Confirm by pressing ENTER again. When all settings are
configured as required, press MODE 4 times to return to the main display (Mode User Colour).
Mode
User Colour
------------ User Colour ------------
Color1
Color2
Color3
Color4
Color5
----------- Stand Alone -----------
Auto
Colour Macro
Static
Tunable White
User Colour
Timer
001
255
–
------------ Colour1 ------------
Dimmer <255>
Strobe <255>
Red <255>
Green <255>
Blue <255>
White <255>
TIMER FUNCTION (Timer)
The timer function allows the standalone modes “Colour Macro”, “Static”, “Tunable White” and
“User Colour” to be timer controlled in such a way that the fade-in time can be set from 0 to 60
minutes, the dwell time from 1 to 24 hours and the fade-out time from 0 to 60 minutes. Time
control starts immediately after activating the timer function in the previously activated stan-
dalone mode and remains active even if the spotlight is switched off and restarted. Select “Timer”
by means of the procedure described above under CONFIGURE STANDALONE MODE and confirm
with ENTER. Now select “Fade In”, “Dwell Time” or “Fade Out” for the individual settings (observe
arrow) and confirm with ENTER. The display will show a three-digit number field in each case. Use
UP and DOWN to set the value as required from 000 to 060 or 001 to 024. Confirm by pressing
ENTER again. Once all settings have been configured as required, activate the timer function by
selecting the submenu item “Timer On/Off” using UP and DOWN, confirm with ENTER, select “On”