Select security screw that best fi ts your screen. Center adapter plate of column (
A
) on the back of the screen and
align the four mounting holes. Attach column (
A
) to screen with four screws and four washers using allen wrench
(
C
) as shown in fi gure 5.1. If screen has a bumped out or recessed back, spacers may be used between the screen
and adapter plate of column (
A
) as shown in fi gure 5.2. Screw must make at least three full turns into mounting
hole and fi t snug into place.
4
Remove Adapter Plate from Adjustable Column
Remove screw and washer from top of adjustable column (
A
) using a 1/2" socket wrench as shown in fi gure 4.1.
Remove hex nut and bolt from back of adapter plate. Slide adapter plate of adjustable column (
A
) off as shown in
fi gure 4.2.
A
5
Mounting and Removing Flat Panel Screen
screw
washer
screen
Figure 5.1
Figure 5.2
spacer
screw
washer
screen
adapter plate
Figure 4.1
Figure 4.2
adapter plate
adapter plate
