INSTALLATION:
1.
Locate a clear sunlit area free from over hanging
branches or obstructions.
2.
Remove Solar Panel kit from carry bag.
3.
Unclip the latches on the side of the Unit and fold panels
outward. Extend the two Stands to their maximum length
and lock in position
4.
Place Solar Panel kit in position facing the sun.
5.
Fully extend battery lead and connect to charge
controller. Ensure that battery connectors do not come in
contact with one another. Connect battery connector to
the ‘+’ Positive (Red) & ‘‘Negative (Black) battery
terminals. Ensure that the connection is secure
NOTE:
To obtain maximum output it is suggested
that the panels are regularly moved to track the
sun’s movement throughout the day
FREQUENTLY ASKED QUESTIONS
Q.
What type of batteries can be used with the system.
A.
Any 12V DC battery that is used for cars, boats, motor cycles, etc., however AGM
batteries are recommended as they are better suited for dedicated solar
cycling/discharge use. If you require a battery, Camec offers the 042885 100AH &
043165 120AH Sealed AGM batteries with exclusive 26 Month Warranty.
Q.
Will the solar panel over charge my battery.
A.
The charge regulator ensures that an appropriate amount of charge is supplied to the
battery, so it will not be over charged.
Q
How do I clean the solar panels.
A.
Dust & dirt should first be swept off the panel surface using a soft brush then using a
wet cloth to wipe the panel surface to remove remaining dirt & grime. It is
recommended that any bird droppings be removed as soon as possible as if left can
cause damage to the surface.
Q.
Is the solar panel kit water proof.
A.
It is recommended that the kit is not exposed to excessive water (eg pressure
washer) to ensure maximum life of the solar panel & regulator.
TROUBLE SHOOTING IF SYSTEM DOES NOT FUNCTION (No blue Charge Indicator)
a.
Check all connections to ensure that they are secure and free from moisture & debris.
b.
Check the battery and ensure it is a 12V battery. Test the battery voltage and If it is
measuring a low voltage (eg 8 volts), it may have reached the end of its serviceable
life. If it is measuring 14.5V or higher, then it is fully charged and the blue charge
indicator may not illuminate or only illuminate cyclically as it needs topping up.
c.
Disconnect the battery cable from the charge controller and measure the open circuit
voltage of the panels. The open circuit voltage should read between 15 & 23.5V DC.
If you are still experiencing difficulties, please contact Camec on 1300 422 632 (Australia), or 09 257 2419 (NZ)
