10
Gas inlet location
(2 Burner Model):
At the front underside of the hob,
110mm from the right-hand side
Gas inlet location
(3 Burner Model):
At the front underside of the hob,
180mm from the right-hand side.
Flexible hose connection can be used with the following conditions:
The hose must be accessible for inspection, it cannot be hidden
within a wall or located in an inaccessible cavity.
The hose must be protected from abrasive contact with moving
parts.
The hose length must comply with the Australian Standards.
The hose must not be subjected to any type of mechanical stress
such as twisting or crushing.
Electrical Connection - LOW VOLTAGE DC12V
To connect this appliance, use a double cable and connect to the
terminal board. The red terminal is the positive pole, while the black
terminal is the negative pole.
Electrical terminal location:
At the rear underside of the hob,
located centrally.
WARNING: DO NOT
connect this appliance to any power
supply other than DC12V.
WARNING: DO NOT
connect this appliance to the main
voltage (230 V~); this would result in the ultimate
destruction of the parts and a hazard to the user.
