Page
20
- Manual
FA01812-EN -
06/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
CAMECONNECT
CAMECONNECT
Keycode
Enable connection
Provider
Status
CONNECTED
Check connection
Save
The CAMEConnect setting only applies to the device set up as MASTER.
By default, connection to CAMEConnect is not active.
Connection to CAMEConnect must be active to receive video entry calls via the app.
[KEYCODE] identifi es the device code.
[ENABLE CONNECTION]
enables video-entry call VoIP remote control.
[PROVIDER] identifi es the remote call service URL.
By default the URL is: xip01.cameconnect.net.
[STATUS] indicates whether connection to CAMEConnect is active or not.
With
[CHECK CONNECTION]
you can check the connectivity status and whether the connection has been successful. After tapping
it a screen appears providing details on the connection status, the LAN interface confi guration, the reachability of GW, DNS and the
Provider.
If the connection fails, check Date and Time or the programming data.
Tap [SAVE] to save the confi guration.
