1
2
3
/.
/&&
/.
/&&
/.
/&&
/.
/&&
p.
66
- M
an
u
al
c
od
e
11
9
R
11
9
R
U
0
1
U0
1
E
N
EN
v.
22
- 0
3
/2
0
1
6 - © C
am
e S
.p.
A
. T
h
e c
onte
nt
s o
f th
is
m
an
u
al
m
ay b
e r
ev
is
ed at a
ny ti
m
e, a
n
d w
ith
ou
t n
oti
ce
.
"Maintained action" feature
: the relay action lasts as long as the transmitter button is pressed .
Fixed 3 second timed monostable”
: once the transmitter button is released the relay action lasts 3
seconds.
Bistable (switch)
: repeatedly pressing the transmitter button will turn on and off the relay conti-
nuously as if it were a switch.
Fixed 5 minute timed monostable
: once the transmitter button is released the relay action lasts 5
minutes.
* 10.1 Selecting functions (for each single output)
11 Duplicating a transmitter
Duplication must be done because each of the transmitters is made with different codes.
1. Simultaneously press the two buttons until the LED fl ashes more quickly;
2. 2 - now press the button you wish to activate (the LED lights up);
3. with 10 seconds, rest the active transmitter against it back part and press the button that needs duplicating for a few seconds.
Once memorisation is complete, the LED will flash 3 times and the transmitter will be ready for use.
Repeat points 1, 2 and 3 for the remaining buttons.
12 Memorising the code onto the receiver
Keep memorisation button pressed until the LED flashes, press the transmitter button to send the code.
The LED will stay ON to confirm memorisation is OK.
Perform the same procedure for each exit (also see examples on the following pages).
1
=> OUT1
2
=> OUT2
3
=> OUT3
4
=> OUT4
LED signal light
radio code
