CAME RIOLX8WS, Руководство пользователя

Страница: 9 / 16

FA00949M4A - 11/2017 FA00949M4A - 11/2017
Description
Wireless fl ashing light controlled via radio by a RIOCT8WS or a RI-
OCN8WS control card, complete with fl at-battery or radio-commu-
nication problems warning Buzzer.
Main control-card components
①
Protective band
②
Cap
③ Antenna
④ Card-fastening screws
⑤ Board
⑥ Battery housing
⑦
Base
⑧
Cap-fastening screw
⑨
KIAROS fi tting (optional )
⑩ Warning LED and programming buttons
Technical data
Type RIOLX8WS
Power supply (V DC) 3
Stand-by absorption (μA) 80
Current draw in transmission (mA) 15
two, lithium CR123A (mAh) batteries 1700
* Battery life (months) 24
Radio frequency (MHz) 868.95
** Radio range over clear areas (m) 30 max.
Type RIOLX8WS
Transmission power (dBm) 10 max.
Materials PC-ABS
* The battery duration is calculated on a yearly average of 20 daily-
maneuvers.
** Do not place the RIOCN8WS or the RIOCT8WS card behind
walls, metal fences or any other obstructions that could interfere
with radio communications.
Installing
⚠
Fit the RIOLX8WS photocells near the RIOCN8WS or the
RIOCT8WS card, so as not to have any metal or cement obstruc-
tions.
- Fasten the base ⑦ onto the chosen surface. When fi tting the
device to a wall, you will need to use THE KIAROS BRACE ⑨ (not
supplied).
- Fit the card
⑤ into the base ⑦ and fasten using the supplied
screws ④ .
NB: Do not change the antenna's position.
- Save, the RIOLX8WS transmitter and receivers , ON the
RIOCT8WS or the RIOCN8WS CONTROL CARD (SEE THE SAVING
CHAPTER).
- Make the necessary functional checks (see the manual FOR the
RIOCT8WS OR THE RIOCN8WS).
- Finish assembling the RIOLX8WS fl ashing light.
Saving
Fit the batteries into all accessories that will be saved.
⚠
After three minutes, the devices shift into stand-by mode; to