CAME MITHO, Руководство пользователя, Страница: 128 / 148

128
User Guide
EN
12
13
Forced arming on “not ready” areas
The anti-intrusion alarm constantly monitors the
connected sensors and detects their status even
when the control unit is disconnected .
During the arming procedure, if one of the sensors
is in alarm status (for example because a window is
open), the area is considered “not ready” for arming .
In this case, before you see the window where you
should insert the user code, you will see the win-
dow shown in figure 12 .
Press the button “
OK ” to accept arming of the
anti-intrusion unit regardless of the sensors in alarm
status .
To refuse arming press the button .
ATTENTION
If you force activation of a “not ready” area, the
alarm signals from the sensors in alarm status at
the time of forcing will be ignored by the anti-
intrusion system for the entire activation cycle.
THE SECURITY MENU
enter code
central 1
01 Area
Areas not ready