CAME FLUO-SW, Сборка и инструкция по установке

Страница: 23 / 34

FA00008-EN v.7 – 05/2017 23 CAME S.p.A.
8. ELECTRONIC CONTROL ADJUSTEMENT
The electronic control has 4 buttons and 4 alphanumeric displays to set all the necessary adjustments.
After turning on the electronic control, the display shows the word "MENU". The operation of the four keys are indicated in
the table.
Keys Description
ENTER Select button, each time you press the button you enter on the
selected parameter.
Save button, pressing for 1 seconds you "SAVE" the selected value.
MENU = Main parameters menu
MEM = Memory management menu
ADV = Advanced parameters menu
SEL = Function selector menu
INFO = Information and diagnostics menu
ESC Exit button, exit from all the parameter or exit from the menu.
↑ Scroll button, each press selects a menu item or increases the value
of the selected item.
↓ Scroll button, each press selects a menu item or reduces the value of
the selected item.
8.1 BASIC SETTINGS MENU
Using the buttons ↑ and ↓ choose MENU, press ENTER to select and adjust the following main parameters:
Display Description Factory settings
DOOR
DOOR TYPE
Setting the automation type. Choose between the following values:
SW2 = SW2 automation PBB2 (LIGHT)
SW4 = SW4 automation PBBS2 (SPRING)
SW5 = SW5 automation PBB3 (HEAVY) SW2
OPEN
OPENING
DIRECTION
Setting the opening direction. Choose between the following values:
← = door hinged on left
→ = door hinged on right ←
ARM
ARM TYPE
Setting the type of arm. Choose between the following values:
PULL = sliding arm
PUSH = articulated arm PULL
VOP
OPENING
SPEED
Opening speed setting. Choose between the minimum and maximum:
minimum value = 15 deg/s
maximum value = 70 deg/s 50
VCL
CLOSING
SPEED
Closing speed setting. Choose between the minimum and maximum:
minimum value = 100 mm/s
maximum value = 700 mm/s 50
TAC
CLOSING TIME
Open door time setting. Choose between the minimum and maximum:
NO = the door is always open
minimum value = 1 s
maximum value = 30 s 1
PUSH
MOTOR
POWER
Force setting. Choose between the minimum and maximum:
minimum value = 1
maximum value = 10 10
LEAF
DOOR WEIGHT
Setting the weight of the door. Choose between the following values:
MIN = light door
MED = medium door
MAX = heavy door MED
RAMP
ACCELERATION
TIME
Set the acceleration time. Choose between the minimum and maximum values:
minimum value = 100 ms (maximum acceleration)
maximum value = 2000 ms (minimum acceleration) 400
BTMD
BATTERY
MODE
Setting operation of battery power device, in absence of electricity. Choose between the following
values:
NO = battery not connected
EMER = emergency open
CONT = continuation of normal operation of the door, with last cycle of opening
Note: the number of operations with battery, depends on the efficiency of the battery, the weight of
the doors and the present friction. NO