CAME BKV Series, Руководство по установке, Страница: 22 / 52

TX 2
-
+
-
DELTA-S
10 TS 2 CX CY CZ CK
DIR TX 2 10 2 TX C NC
TX 2 DELTA
10 11 10 11 NO C NC
10 TS 2 CX CY CZ CK
+ -
TX 2 DELTA
10 11
10 TS 2 CX CY CZ CK
+ -
10 11 NO C NC
TX 2
-
+ -
DELTA-S
10 TS 2 CX CY CZ CK
DIR TX 2 10 2 TX C NC
p.
22
- M
an
u
al
FA
0
1
2
7
4
-E
N
- 1
1/
2
0
18 - © C
A
M
E S
.p.
A
. - T
h
e c
onte
nts of th
is
m
an
u
al
m
ay c
h
an
g
e, at a
ny ti
m
e, a
n
d w
ith
ou
t n
oti
ce
. O
rig
in
al
in
str
u
cti
on
s
Photocells safety test
At each opening and closing command, the control board checks the efficacy of the safety devices (such as,
photocells).
A malfunction will prevent any command from working and
the display will read [Services test failed]
Enable the [Safety devices test] function when programming.
Safety devices
Photocells
Confi gure contact CX, CY, CZ or CK (NC), input for safety devices such as photocells as:
-
[C1] reopening during closing. When the gate is closing, opening the contact causes the inversion of movement
until opening is complete;
-
[C2] reclosing during opening. When the gate is opening, opening the contact triggers the inversion of movement
until the gate is completely closed.
-
[C3] partial stop. Stopping of the gate, if it is moving, with consequent automatic closing (if the automatic closing
function has been entered);
-
[C4] obstruction wait. Stopping of the gate, if it is moving, which resumes movement once the obstruction is
removed.
-
[C13] reopening when closing with immediate reclosing once the obstruction is removed even when the gate
is stopped.

If contacts CX, CY, CZ or CK unused, turn them off when programming.