FA00526-EN – ver. 3.3.1 – 12/2016
8
4.
CONNECTIONS
Use shielded cables and connect the shield to the negative logic supply-12VDC (GND). In addition to the
ordinary supply, tamper and alarm relay, you MUST link between the transmitter and the receiver SADRIN TX
- SADRIN RX the two-wire synchronous (+sync TX to + SincRX) (-sync TX to, -sync RX).
NB: Only for expansions is provided the switch. The beam 1e2 can not be selected because they are
already present on the motherboard
Tamper
+ Sinc.
- Sinc.
Supply
12Vdc
Tamper NC
Alarme NC 500 mA
RX
Supply
12Vdc
Tamper NC
+ Sinc.
- Sinc.
TX
Tamper
+
-
+
-
