SAFETY INSTRUCTIONS
When correctly installed in compliance to installation instructions and adhering to all
current electrical, mechanical and manufacturer regulations, your automation system
will provide a high degree of safety and problem free operation.
Please take note of the following warnings that must be followed in order to
prevent accidents during your gate operation:
•
Do not allow children to play near the gate.
•
Keep all remote control operating devices out of the reach of children.
•
Do not pass through the gate whilst in operation. Wait until they are fully open before passing through.
•
Do not stop unnecessarily when passing through the gate.
•
Keep feet away from the bottom of the gate during operation.
•
Do not operate the gate by remote control unless they are in view.
•
Do not attempt to block or interfere with the gate movement during operation.
•
Under no circumstances should you attempt to modify the gate automation system.
•
Ensure that your gate is serviced at 3 to 12 month intervals (dependent on number of openings) by your installation/
maintenance company.
•
Report any signs of malfunction to your installation/maintenance company immediately.
•
In the case of malfunction, isolate the power supply, release any additional locking mechanism, manually open the
gate (see manual release instruction booklet) and call your installation/maintenance company.
•
If you are in any doubt regarding the operation of your gate, call your installation/maintenance company.
