CAME Ati-S3, Быстрая настройка

Страница: 9 / 12

ZA3P: transmitters
Should the transmitter not operate as suggested above,
call CAME helpline 0115 921 0430 for technical support.
add a transmitter button
1. Press and hold the CH1 button, the PROG. LED starts fl ashing rapidly.
2. While keeping the CH1 button held down press and release a button on a transmitter
The PROG. LED goes solid to signal the successful saving of the code.
3. Release the CH1 key.
A maximum of 25 individual buttons can be saved.
remove all transmitters
1. Press and hold the CH1 and CH2 buttons simultaneously until the PROG. LED stays lit
All previously saved transmitter buttons will be removed from the memory of the control board.
L N
U V W X Y E E3
10 11 S 1 2 3 3P 4 5 7 2 C1 CX B1 B2 TS 10
L1T
CT 0 12 24
L2T
2
FC1 FA2 FC2
FA1
L2T L1T 1 2 3 4
0 12 24
L N
U V W X Y E E3
10 11 S 1 2 3 3P 4 5 7 2 C1 CX B1 B2 TS 10
L1T CT 0 12 24 L2T
2 FC1 FA2 FC2 FA1
L2T L1T 1 2 3 4
0 12 24
Ensure the AF card is fi tted (refer to the wiring diagram).