P
age
17
- Manual
FA01815-EN
- 06/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
To add a new passage, click on [Access control].
Next select [Manage Passages].
Then click on [Add new passage].
Name the passage
A
and select the type of operator between the zones from the dropdown list.
B
Click [Yes] under [Enable Anti-Passback] to enable Anti-Passback for this passage.
C
Select the two zones the passage will connect from the dropdown menus [Zone 1] and [Zone 2].
D
Make sure the readers are installed on the correct side of the confi gured passage. This is indicated in the
heading.
Set the module inputs and outputs.
F
Click [New] to connect the readers to the passage.
E
Name the reader.
G
Select the ACS01 module connected to the reader.
H
Select the reader type from the dropdown menu.
I
Select the connection type.
J
Select the corresponding port.
K
For more information on wiring readers, see "How to connect CAME components".
Click on [Add to passage] to save.The reader has been added to the [Reception].
