CAME 806rv-0010, Руководство по установке

Страница: 26 / 64

s
f 1 6 1
1
1 2 3 4
1 2 3 4
1 2 3 4
u 1
4
[ ] OFF
[ ] ON
Page
10
- Manual
FA01700-
EN
- 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
F 16 -
PIN
• Got to Programming, click on PIN [F16] and then
click on [1].
• The default PIN, 1234, will appear. The first number will be flashing. To change the PIN:
[</>] to change the number;
[ESC] to move to the next digit;
[ENTER] to end and confirm the PIN (at any time).
the display will read [Sto] to confirm that the date has been stored.
Storing a user transmitter is always associated to a control mode (see funtions [F 2]/[F 3]/[F 4]/[F 5]).
Remove the Memory Roll card, before proceeding.
U 1 - Store Users (max. 3,000)
• Enter the programming, select Store Users [U1].
• Choose which relay to associate to the code [1]/[2]/[3]/[4].
F 15 - Store in Rolling Code mode
By default [ ], to add Rolling Code transmitters, you
need to access the control board and run the [U1]
procedure.
By selecting [ ] you can store the transmitters that you
want to add, and use an already stored transmitter as a
key (please, see the transmitter's packaging).
For protection against tampering and unwanted programming.