p.
33 -
M
a
n
u
a
l c
o
d
e:
1
1
9
P
M
9
9
11
9
P
M
9
9
v
e
r.
2
.0
2.
0 0
7/
2
0
11
© C
A
M
E
C
a
n
ce
lli A
u
to
m
a
ti
ci
S
.p.
a
. - T
h
e d
a
ta a
n
d i
n
fo
rm
ati
o
n i
n
t
h
is
m
a
n
u
a
l m
ay b
e c
h
a
n
g
e
d at a
n
y time a
n
d wit
h
o
u
t o
b
lig
a
ti
o
n
o
n
t
h
e p
a
rt
of C
a
me C
a
n
ce
lli A
u
to
m
a
ti
ci
S
.p.
a
. to n
o
tif
y s
a
id
c
h
a
n
g
e
s.
ENGLISH
WARNING!
important safety instructions:
READ THIS PART CAREFULLY!
Introduction
• This product is only intended to be used for the purpose it was
designed. Any other use is therefore improper and dangerous. La
CAME cancelli automatici s.p.a. is not liable for any damage due to
improper, erroneous and unreasonable use • Keep these warnings
together with the installation and users' manual for the automation
system.
Before installing
(check what's there: if the outcome is negative, refrain from conti-
nuing until you are compliant with safety standard)
Check that the part being automated is in proper working order, that
it is balanced and aligned, and that it opens smoothly. Make sure
you have suitable mechanical stops. If the operator will be installed
less than 2.5 m from the floor or from any other access level, check
whether you need additional protections and/ or warnings. With
pedestrian doors framed into the doors that will be automated, a
system must be in place to block their opening during movement.
Make sure the opening of the automated door leaf does not cause
any trapping situations involving any surrounding fixed parts. Do
not install the operator upside down or on any elements that may
bend. If necessary, add suitable reinforcements at the fastening
points. Do not fit onto door leafs that are installed on a slope, only
on level ground. Check that any watering devices cannot wet the
gearmotor from the bottom upwards.
Installation
Properly demarcate the entire site to prevent any unwanted access
by unauthorised personnel to the working area, especially children
and minors. Be careful when handling operators that weigh more
than 20 kg (see installation manual). If such is the case, make sure
you have proper hoisting equipment. All opening commands (but-
tons, key selectors, magnetic card readers, an so on). must be in-
stalled at least 1.85 m from the gate's area of movement, or so that
they are unreachable from the outside. Also, the direct commands
(button or touch) must be installed at least 1.5 m high and not re-
achable by the public. All "maintained action" commands must be
placed where the moving door leaves and transit areas are comple-
tely visible. If missing, affix a permanent tag showing the position
of the release device. Before delivering to the end user, check that
the operator complies with Standard EN 12456 (impact testing),
making sure the operator is properly set and adjusted and that all
safety and protection devices and manual release work properly.
Affix the Warning Signs in places that are clearly visible, where
necessary (such as the gate tag).
Instructions and special recommendations for users
Keep gate-operating are free of any obstacles. Keep the photocells'
range of operation free of vegetation. Do not allow children to play with
the fixed command devices, or in the area of operation of the gate.
Keep the remote control devices (transmitters) away from children.
Check the system frequently, for any anomalies and signs of wear and
tear or damage to the mobile structures, the component parts of the
operator, all fastening points and devices, the cable and any acces-
sible connections. Keep any jointed parts like hinges lubricated and
clean of debris and the guide-sleds free of any friction. Perform fun-
ctional checks to the photocells and sensitive edges every six months.
Ensure proper cleaning of the glass on the photocells (use a slightly
damp cloth); do not use solvents or other chemical products). If repai-
rs or changes to the system settings become necessary, release the
operator do not use it until all safety conditions are restored. Cut the
main power supply before releasing the operator to perform manual
openings.
Check the instructions. It is FORBIDDEN for users to perform ANY
OPERATIONS THAT ARE NOT EXPRESSLY REQUESTED OF SAID
USERS in the manuals. For repairs, changes to the settings and extra-
ordinary maintenance, CALL FOR TECHNICAL ASSISTANCE. Enter any
interventions in the periodic maintenance log.
Special instructions and recommendations for everyone
Keep away from the hinges and any moving mechanical parts. Stay
out of the operating range of the operator while it is moving. Do not
oppose the movement of the operator as this may result in danger. Al-
ways be careful around the dangerous parts, which must be properly
indicated with warning signs and black and yellow stripes. When using
a selector switch or a maintained-action mode command, keep che-
cking that no persons come within the operating range of the moving
parts, until the command is released. The gate may move at any mo-
ment without warning. Always cut off the main electric power supply
before performing any cleaning or maintenance.
