CAME-TV NANO, Руководство пользователя, Страница: 14 / 24

The Hub incorporates two Masters and one built-in Remote.
Each Master within the Hub can accommodate up to 3 Remotes.
With this configuration, a single hub enables connections for up to
10 NANO within a single system, while two hubs can facilitate
connections for up to 15 NANO.
(Please refer to the pairing diagram above for further guidance.)
The hub has a micro USB port to power/charge the unit via
5V DC with a USB power supply or power bank.
When power is connected it can run directly without batteries and
also charge when batteries are installed. The Hub can run alone
on batteries and with one installed run time is about 8-10 hours
and with two batteries installed, the run time increases to about 15-18 hours.
INPUT OFF ON
USB Function
1. Direct Power Supply to
the HUB
2. Charge batteries in the
battery compartment.
3.5mm TRRS audio jack
It adheres to the OMTP
standard.
If your equipment follows
the United States CTIA
standard,
you will need to use a
conversion cable.
USB 5V Switch button
3.5mm TRRS
Nano with Hub Set
CAME-NANO
13