Bind and Frequency Switch
Binding Transmitter and Receiver
Function explanation: To bind one Crystal-800 Transmitter to one Crystal-800 Receiver.
Process: Turn both RX and TX units on. Press BIND buttons on Transmitter and Receiver
together at the same time and press for more than 5 seconds.
When the LED lights turn off, release the buttons. When the LED lights flash one by one, this
means the device has started the bind progress. When all of the LED lights on both units are
working, this means bind progress has finished. You may need to restart both the TX and RX units.
Attention: Bind progress should be performed on the Transmitter and Receiver at same time,.
Please turn off all other devices during bind progress in order to avoid mismatch errors.
Channel Frequency Switch
This feature is implemented either with the transmitter or receiver. Only one is needed. You do
not need to implement Frequency Switch on both units at the same time.
Transmitter (or Receiver): Press the button more than 5 seconds. When all 3 Indicator Lights
(HDMI, LINK, WORK) are turned off, release the Frequency Button. 3 lights will flash as 0.5Hz
frequency, and then 4 lights turn back to normal state. This means the frequency channel change
has completed.
Frequencies supported by CAME-TV Crystal-800
：
5180
5220
5260
5320
5520
5540
5560
5580
5600
5620
5640
5660
5680
5700
