CAME GROUP bpt brahms XDVA2304, Руководство пользователя

Страница: 24 / 64

p.
8
- M
an
ua
l c
od
e:
24
80
75
50
v.
1
06
/2
014
Playback with EVENT SEARCH
From MENU, SEARCH select EVENT SEARCH.
On the right of the window, select the date and channels. Click on SEARCH.
Depending on the search you want to make, check MOTION, SENSOR or ALL.
The events will appear. Select the event by double clicking.
Playback with IMAGE
From MENU, SEARCH select IMAGE. On the right of the window, select the date and channels. Click on SEARCH.
When the image you are searching is found, you can playback by double clicking on the image.
Click LOCK to block the image, while clicking SAVE, saves the image to the hard drive.
Click to SAVE ALL, to save all images onto the hard drive.
⚠
To save images, activate the feature TAKE SNAPSHOT on the ALARM HANDLING window.
BACKUP
BACKUP is available via UBS.
From the BACKUP window you can set the backup starting and ending time and select the channels.
The ALL feature lets you back up everything.
The set BACKUP options can be controlled by users.
BACKUP starts by clicking on the START button.
REMOTE CONTROL
Remote control is only available if the DVR is connected to the LAN/WAN or to the internet.
Accessing the DVR via the LAN
MENU, SETUP, NETWORK and select the NETWORK board.
Enter the following data into the board
IP ADDRESS
SUBNET MASK
GATEWAY
If using the DHCP, you need to enable it on both the DVR and the ROUTER.
You can control the DVR's network settings from the INFORMATION window.
To set the network video parameters, photogram frequency, and so on) select RECORD SETUP.
Open the browser and enter the DVR's IP address and press send.
The ActiveX component is downloaded from the browser.
⚠
If the http port is not the default one (80), enter the http port after the IP address.
You will need to provide USERNAME and PASSWORD.