M1
Page
3
- Manual
FA01031-IT
- 08/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Page
3
- Manual
FA01427-EN
- 07/2020 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
AGT V200
Description of AGT V200
Internal video receiver.
Function of terminals and jumper
Terminal board M1
3
Video signal
Coaxial cable
4
Video signal screen
If the line does not continue, connect a 75Ω resistor (violet-
green-black-gold) between terminals 3 and 4.
3
Positive video signal
Twisted-pair cable
4
Negative video signal
If the line does not continue, connect a 56Ω resistor (green-blue-
black-gold) between terminals 3 and 5 and a second 56Ω resis-
tor between terminals 4 and 5.
5
–
14 to 17.5 V monitor power supply
6
+
7
Call from entry panel input
Audio to monitor
Audio to entry panel
AUX2: auxiliary services (24V 100 mA)
18
AUX1 command (intercom stair light)
Doorbell input
AUX2 LED (active to earth)
Technical data
Type
For all models
Power supply (VDC)
14 to 17.5
Current consumption (mA)
95
Consumption in stand-by mode (mA)
< 12
Single LED consumption (mA)
1
Bandwidth at -3dB (MHz)
5
Video input impedance (kΩ)
≥ 22
Coaxial video input (Vpp)
1
Type
For all models
Video input from twisted-pair cable (Vpp)
±0.6
Storage temperature (°C)
-25 to +70
Operating temperature (°C)
+5 to +40
IP Rating
IP30
Video standard
PAL/NTSC
LCD TFT display (inches)
5
