Push Buttons
Key Pads
Strikes
Magnetic Locks
Key Switches
Relays & Timers
Access Control
CM-333 Battery Operated with Relay Output Active Infra-red “Hands-Free” Switches Installation Instructions
5502 Timberlea Blvd.,
Mississauga, ON Canada
L4W 2T7
www.camdencontrols.com
Toll Free: 1.877.226.3369
Section 4: System Inspection
Instructions
After the Installation and operational check of the system:
1. Place warning label on the door (as per ANSI A156.10
or A156.19 guidelines). This will advise the person
entering the swing side zone that the door will move.
2. Instruct the owner on door system operation and how to
test it. This should be checked on a daily basis.
3. Instruct the owner on what to do if the door or any of its
components become damaged.
4. Strongly recommend to the owner that the complete
entry be inspected twice a year as part of the service
agreement.
Section 5: Technical Data
No. of IR Sensors
(1)
Batteries (Supplied)
(2) ‘AA’ Alkaline (Supplied)
Estimated Battery Life
2 Years (Based on 100
Operations/Day)
Standard Operating
Range
1”- 12” (25.4mm - 304mm)
Factory Set to 6” (152 mm)
Operating Mode
Momentary
Momentary with Alarm
Inputs
‘Request to Exit’ External
(Door Contact) Input
Wireless Output
TX-99 Plug-in 915Mhz. Spread Spectrum
Wireless Transmitter
Relay Output
(1) Form ‘C‘ (SPDT)
Relay Contact Rating
2 Amps @ 30 VDC
Output Type
Fail-secure
File: CM-333 hands-free switches
manual_R2.indd
Revised: 07/03/2018
Part No: 40-82B195
Diagram 5
Jamb Cutout Dimensions
1’
0’
2’
3’
1”
(25.4mm)
12”
(304mm)
Diagram 6
Adjustable Range Settings
73mm
7/8"
2
38 mm
1/2"
1
3
79mm
1/4"
Drill & Tap
6-32 (2 holes)
Questions? Call us toll-free at 1-877-226-3369
Page 4 of 4
