Reversing the Door Swing
14
❷
Transfer Centre Hinge Bracket to the
Left
a. Remove the centre hinge bracket and shim by
removing the three screws. NOTE: Keep these
screws with the hinge bracket. They are longer
screws and will be used when installing the hinge
on the other side.
b. Remove the three painted screws and take
washers from the centre left side of the cabinet. Screw them into the holes on
the right side, which were uncovered in Step "a" above.
c. Place the centre hinge bracket and shim over
the holes at the centre left side of the cabinet,
insert the three screws that were removed
with the centre hinge bracket in Step "a" and
tighten securely.
Do not install the hinge pin yet.
On each door remove the metal
door stop. Use the centre hinge
pin as a guide to align the door
stop on the opposite side, after
reversing the handles.
Transfer Bottom Hinge Bracket to the Left (cont.)
c. Remove plug button and screw from the bottom
left side of the cabinet and install at the bottom
right.
d. Reinstall the spacer shim, hinge bracket, screws
and plastic washer to the bottom left side of the
cabinet.
Bottom Left
Plastic Washer
Centre Right
Left Side
Right Side
Door Stops
Washer
Washer
Door Stops
❸
Transfer Top Hinge to the Left
Interchange hinge and shim at top right with 2 plug buttons at top left of cabinet. Do
not tighten screws on hinge side at this time.
❹
Transfer Door Stops
Centre Left
Safety Infor
mation
Installation Instr
uctions
Customer Ser
vice
Operating Instr
uctions
Tr
oubleshooting T
ips
