3
TIPs: It is easier to start rail installation from the bottom and move up.
1. Using the chart on page 2, select the type of holding you would like to achieve. Follow the
number guides etched into the columns of the cart to place your sheet pan, food pan, tray or
pizza box in the correct position. For example, to achieve standard capacity for full-sized sheet
pans, place the rails at positions 1, 3, 5, 7, 9, 11 and 13.
2. Insert the top tabs into the front and corresponding middle and rear slots of the column.
3. Slide the rails towards the back of the cart then rotate it down into a nested position.
4. Install the subsequent rails into position following the appropriate numbering guide. Once the
rails have been installed on one side of the cart, repeat instructions to configure the other side.
III. rail Installation and Capacity Guide (continued)
18" x 26" (45,7 x 66 cm)
Full size sheet Pans
4" (10 cm) Deep
Full size Food Pans
(Pans fit 2 deep)
large Pizza Boxes
16" x 16" x 2" (40,6 x 40,6 x 5,1 cm)
MaXIMuM
16 / compartment
16 / Low Cart
32 / Tall Cart
MaXIMuM
8 / compartment
8 / Low Cart
16 / Tall Cart
sTanDarD
7 / compartment
7 / Low Cart
14 / Tall Cart
sTanDarD and MaXIMuM
10 / compartment
10 / Low Cart
20 / Tall Cart
sTanDarD
7 / compartment
7 / Low Cart
14 / Tall Cart
13" x 18" (45,7 x 66 cm)
Half size sheet Pans
(Trays fit 2 deep)
40 x 60 cm (20
1
⁄
2
" x 23
1
⁄
2
") Trays
(Lip load)
MaXIMuM
32 / compartment
32 / Low Cart
64 / Tall Cart
MaXIMuM
15 / compartment
15 / Low Cart
30 / Tall Cart
MaXIMuM
16 / compartment
16 / Low Cart
32 / Tall Cart
MaXIMuM
32 / compartment
32 / Low Cart
64 / Tall Cart
sTanDarD
14 / compartment
14 / Low Cart
28 / Tall Cart
sTanDarD
7 / compartment
7 / Low Cart
14 / Tall Cart
sTanDarD
10 / compartment
10 / Low Cart
20 / Tall Cart
sTanDarD
14 / compartment
14 / Low Cart
28 / Tall Cart
2
1
⁄
2
" (6,5 cm) Deep
Full size Food Pans
32 x 53 cm (12" x 20") Trays
(Trays fit 2 deep)
