Step 1: Install Bottom Frame
IMPORTANT! DO NOT CUT tie straps until AFTER
the bottom frame is installed.
IMPORTANTE! NO CORTAR las atuduras plasticas
del panel hasta el marco inferior haya sido instalado.
5
2
3
4
1
Remove
Red Up Arrow Stick er
from outside of each post.
Place Bottom Post Connector
Frame up onto posts,
with frame clips facing down.
Install wedges as shown.
Push frame down onto wedges.
Mallet frame down on inside
4 corners.
Frame clips must be fully
engaged into wedge
clip openings, and top of
frame
fl
ush with top of wedges.
1
2
3
4
5
