CAMBRIONIX PD-Sync4, Руководство пользователя

Страница: 6 / 16

PDSync-4 Page 5 of 14
3.Safety Guidelines and Precautions
Safety Warning Potential risk if ignored
Do not modify the product in any way Fire, electric shock or personal injury may occur
Do not dismantle the product Fire, electric shock or personal injury may occur
Do not bend, compress or drill into any part
of the product Damage, electric shock or personal injury may
occur
Parts of Cambrionix products may become
hot during operation. Do not obstruct air
vents on the product or operate the product
in an environment where the
ambient temperature is outside the
recommended operating temperature region
An increased internal temperature may cause a
fire
Cambrionix products are not
reverse-polarity protected. The power
connections MUST be connected
correctly. If in doubt, please contact
Cambrionix
Damage to your product may occur. A fire or
electric shock may result
Do not short circuit the Power Supply Unit
(PSU) supplied with your product
Sparks, fire or electric shock may result
Ensure dust does not collect around the
power plug pins or power socket, or in
/around the air vents to the extent it causes a
reduction in air circulation A fire may result if there is combustible material
within the power socket or around the power
plug, or if the internal temperature increases
due to lack of air circulation
Do not allow liquids to come into contact
with the unit or power supply
Fire, electric shock or personal injury may occur
Keep the power socket (where the power
cord is connected) unobstructed
The power cord must be disconnected to cut off
power to the product when an issue occurs.
Note that the product may not be completely
powered down by only using the power switch
on the product
Do not use a damaged power cord or plug, or
a loose power socket
An electric shock or fire may result
Do not power multiple products from a single
power socket
Overheated power sockets may cause a fire
Do not touch the power plug with wet hands An electric shock may result