CAMBRIONIX OEM-U8S, Руководство пользователя

Страница: 10 / 43

OEM-U8S Page 10 of 43
4. Getting Started
This manual provides a reference for end-users installing for the first time and using their hub
afterwards. As well as a guide for product safety-related information.
The OEM-U8S is intended to be used in an indoor static environment in which the environment falls
within the tested specifications to provide charge, sync and management functionality. Please see
the physical specifications section of this manual for information on the environment specifications.
4.1. Unpacking your product
When you have received your product, please check the packing slip inside the box to ensure all
contents and quantities are correct before opening. This is to avoid retesting and repackaging any
items that are not required.
When opening the packaging, use a suitable method to open the box i.e, do not use a knife. This is to
ensure the product is not damaged.
CAUTION
Personal Injury and Damage to the product
There will be a label on the hub advising you to read the User manual before
use. This will need to be removed before use as it may be covering host ports,
vents etc.
4.2. What's Included
l
OEM-U8S Hub
4.3. Connecting to a Host
Once the power is connected, connect the OEM-U8S to your host system using a USB 2.0 Type-B
cable. Using an incorrect host cable may result in the hub and all subsequent ports not being
recognised by your host.
Please note that USB specifications require a minimum 100 mA charge current to be available during
data transfer. As indicated in above, if the attached device has a BC1.2 compliant CDP port, the
device can draw up to 2.1A whilst transferring data.
4.4. Charging
Your OEM-U8S will allow your device to charge at the maximum rate possible up to 2.1A. The way that
charging takes place is the OEM-U8S will provide the device with a capability to charge and the
devices USB charging controller will determine the maximum amount of charge it wants to draw
down.